Most VoIP problems in an office start at the router or the firewall. The settings below cover the most common cases.
- Turn off SIP ALG (some routers call it SIP Helper or SIP Passthrough). It rewrites SIP packets and causes failed registrations and one-way audio.
- Allow outbound UDP traffic from the phones to the internet. No port forwarding or DMZ towards the phones is needed.
- Avoid double NAT, meaning two routers in a row. If there is a second router, put it in bridge mode.
- Give voice priority (QoS) when the same line also serves computers.
- If the firewall closes idle UDP connections quickly, enable keep-alive on the phones so they stay reachable for incoming calls.
- Connect the phones by cable wherever possible.
If your firewall runs strict rules and you need the addresses and ports of your service, ask the Helpdesk for them.
